FLIR CO-X SD MG Gen 2+ NV Clip-On System

The Armasight CO-X Night Vision Clip-On System is one of the most advanced Night Vision Clip-On systems for mid-range night shooting, and stands out from the competition when it comes to clarity, versatility, reliability, function and value. The CO-X Night Vision Clip-On System converts your existing day scope into a night vision device and provides excellent target acquisition and aiming capabilities for the demanding sports shooter, hunter, military, law enforcement, and security personnel. Engineered using the latest advancements in Night Vision technology, the CO-X Clip-On System eliminates the traditional requirement of removing your existing day scope from your rifle to replace it with a dedicated night vision sight (which would also involve re-zeroing). The CO-X simply mounts in front of your existing day scope. Because the CO-X Clip-On System is factory bore-sighted to tolerances of less than 1 MOA, no rezeroing is required. The Clip-On System allows the user to maintain consistent positioning and shooting accuracy, all while maintaining the use of a fully familiar day scope. A wireless remote control unit can be placed anywhere on the user’s weapon, allowing quick and easy activation of the CO-X Clip-On System.
Recommended for use with day scopes of up to 6X-7X magnification, the CO-X is equipped with a locking quick-disconnect mounting system that provides the user with an simple and fast way to attach or detach the CO-X on any standard Weaver or Picatinny rail. The CO-X Night Vision Clip-On System can be equipped with high-performance Gen 2+ image intensifier tubes using Green phosphor or “Quick Silver” and “Ghost” image intensifier tubes which provide users with natural B&W night vision displays.

Features:

- Converts your day scope, sight, or binoculars into night vision device
- Mounts in front of any day scope with no re-zeroing required
- Available in a variety of high performing Gen 2+ and Gen 3 image intensifier tube options
- Wireless remote control
- Manual gain control for the best possible image contrast in both high and low light conditions (CO-X MG model)
- Powered by a single AA or CR123A battery
- Bright light cut-off system
- Battery condition indications
- Filled with dry nitrogen to prevent internal fogging
- Mounts on Picatinny/ Weaver rail with a quick release mount
- Mounts on the lenses of specified day scopes with the optional adapters
- Long-range XLR-IR850 illuminator
- Mil Standard compliant

Accessories Include:

- Packing Box
- Soft carrying Case
- Battery
- Battery adapter CR123A 3V / AA 1,5V
- Lens Tissue
- Instruction Manual with Warranty Card
- Special Wrench
- AWReC (Advanced Wireless Remote Control) #94
- Picatinny adapter for AWReC (Advanced Wireless Remote Control)
- Light Suppressor for Day Scope
- Light-Suppressor 1
- Light-Suppressor 2
- Light-Suppressor 3
- Quick Release Mount
- XLR-IR850 Detachable X-Long Range Infrared Illuminator
- Mount for IR illuminator #60

Specifications:

- IIT Generation: Gen 2+ SD (Standard Definition) MG
- Resolution: 45-51 lp/mm
- Magnification: 1x
- Photocathode Type: Multi-Alkali
- Lens System: F/1.44; 80mm
- Field of View: 12°
- Range of Focus: 10m to Infinity
- Exit Pupil Diameter: 21mm
- Remote Control: Wireless
- Manual Gain Control: Yes
- Bright Light Cut-off: Yes
- Automatic Shut-off System: Yes
- Low Battery Indicator: Yes
- Infrared Illuminator: Detachable Long Range IR Illuminator
- Power Supply: CR123 Lithium 3V, or AA Alkaline 1.5V, or any AA or CR123 type rechargeable batteries with voltage from 1.2V to 3.7V
- Battery Life: 60 Hours (3V) / 30 Hours (1.5V)
- Environmental Rating: Water and Fog-Resistant / Waterproof (optional)
- MIL-STD-810: Yes
- Operating Temperature: -40° to 122 °F
- Storage Temperature: -58° to 122 °F
- Dimensions (with Mount): 5.90" × 3.90" × 3.20"
- Weight: 1.70 lbs (with Mount, without Battery)